Autel

Original Autel MaxiDiag MD806 Pro Full System Diagnostic Tool Multi-Language same function as MD808 Pro

En stock. Histoire 8 vendu. Numéro d'articleHKSP342

Achat immédiat: 228.00
Livraison:
Livraison gratuite Express Shipping Service    Estimated delivery time: 3-5 Days.See details»
Poids:
1.6KG
Paquet:
33cm*26cm*10cm     ( Inch: 12.96*10.21*3.93 )
Résultats:
Return for refund within 30 days,buyer pays return shipping. Read details»

Description du produit

Autel Maxidiag MD806 pro has the same function as MD808 Pro, it supports all System Diagnoses, Full OBD2 Functions and some special functions including Oil Reset, EPB, SAS, DPF, BMS, ect.
Original Autel MaxiDiag MD806 Pro Full System Diagnostic Tool Multi-Language same function as MD808 Pro



MD806 Pro Supported:

English, Traditional Chinese, French, German, Spanish, Portuguese, Dutch, Polish, Swedish, Korean, Japanese, Russian, Italian, Greek, Simplified Chinese.
The default language is English after package reached, can send us the SN number change language.


Produit description:
The MD806 Pro diagnostic scanner is an excellent tool for car repair shop owners, professional mechanics, and DIYer enthusiasts. It may not be a high-level diagnostic scanner, but neither is it an entry-level scanner. Autel MD806 PRO is a full system diagnostic scanner that can quickly establish a data link to the electronic control units of the vehicle being serviced directly.

Maxidiag MD806 Pro Functions:

OBD II Diagnostics:
The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the drive train systems of OBD II vehicles.When more than one vehicle control module is detected by the scan tool,you will be prompted to select the module where the data may be retrieved.The most often to be selected are the Power-train Control Module [PCM] and Transmission Control Module [TCM].
 
System Status:
Select this function to display the system status of the test vehicle, refer to the following description for the system status of the test vehicle.
1. OK – indicates that the monitor being checked has completed its
diagnostic testing.
2. INC – indicates that the monitor being checked has not completed its
diagnostic testing.
3. N/A – indicates that the monitor is not supported on that vehicle.
 
Read Codes:
Read Codes can be done with the key on engine off (KOEO) or with the key on engine running (KOER). This function is used to read the detailed information of a particular diagnostic trouble code for technicians to better solve the problem.
 
Erase Codes:
Erase Codes is performed with a key on engine off (KOEO). This function is used to delete diagnostic trouble code when the fault the caused the specific DTC is fixed.
 
Record Data:
The Record Data function allows recording vehicle modules’ Parameter Identification (PID) data to help diagnose intermittent vehicle problems. You could save data files to the Micro SD card and then use the Playback function to view the saved files.
 
Freeze Frame:
Freeze Frame Data allows the technician to view the vehicle’s operating parameters at the moment a DTC (Diagnostic Trouble Code) is detected.For example, the parameters may include engine speed (RPM), engine coolant temperature (ECT), or vehicle speed sensor (VSS) etc. This information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
 
I/M Readiness:
I/M Readiness function is used to checking the operations of the Emission System on OBD II compliant vehicles. It is an excellent function to use prior to having a vehicle inspected for compliance to a state emission program.
 
O2 Monitor Test:
OBD II regulations set by SAE require the relevant vehicle monitors and tests on the oxygen (O2) sensors to identify problems related to fuel efficiency and vehicle emissions. These tests are not on-demand tests and they are done automatically when engine operating conditions are within specified limits. These test results are saved in the on-board computer's memory.
 
On-Board Monitor Test:
The On-Board Monitor Test is useful after servicing or after erasing a vehicle’s control module memory. The On-Board Monitor Test is used for non-CAN-equipped vehicles to retrieve and display test results for emission-related power train components and systems that are not continuously monitored. This function is also used for CAN-equipped vehicles to retrieve and display test results for emission-related power train components and systems that are continuously and non-continuously monitored. Test and components IDs are determined by the vehicle manufacturer.
 
Component Test:
The Component Test function allows initiating a leak test for the vehicle's EVAP system. The scan tool itself does not perform the leak test but commands the vehicle's on-board computer to start the test. Different vehicle manufacturers might have different criteria and methods for stopping the test once it has been started. Before starting the Component Test, refer to the vehicle service manual for instructions to stop the test.
 
Vehicle Information:
The Vehicle Info. the function enables retrieval of Vehicle Identification No.(VIN), Calibration ID Nos. (CINs), Calibration Verification Nos. (CVNs) and In-use Performance Tracking on 2000 and newer vehicles that support Mode 9.
 
Modules Present:
The Modules Present function allows viewing of the module IDs and communication protocols for OBD II modules in the vehicle.
 
DTC Lookup:
The DTC Lookup function allows user to search definitions of DTC stored in built-in DTC library.


Special functions:

1. Oil Reset - When the oil change operation is completed, using this car scanner to rest the system is needed so it can calculate when the next oil change is required.
2. EPB Service - It has a multitude of uses to maintain EPB, including deactivating and activating the brake control system, assisting with brake fluid control, etc.
3. SAS Service - It can be used to effectively perform calibration for the Steering Angle Sensor, and clear fault memory.
4. DPF Service - It allows you to clear the blockage through the continuous burning of the particulate matter captured in the DPF filter.
5. BMS Service - With this function, you can perform a reset on the vehicle battery for clearing the fault information and re-match the battery.
6. Throttle Service - The engine better adjust the idle speed, controls the injection quantity, and adjusts the shift point.



Autel MD806 Pro Specification:

Processor: ®Thumb® Processor running at up to 400 MHz
Memory: 32MB, 166 MHz
Display: 4.0 inch LCD with 800 x 480 resolution
Connectivity: Mini USB: 2.0; Micro SD Card (16GB)
Power Consumption: 1.7 W
Operating Temperature: -10°C to 60°C (14°F to 140°F)
Storage Temperature: -20°C to 70°C (-4°F to 158°F)
Operating Humidity: 5% - 95% non-condensing
Housing: Strong plastic housing with protective rubber boot
Dimensions: 202 mm x 92 mm x 35 mm (8.35” x 3.62” x 1.4”)
Weight: 313 g (0.69 lb.)

Package includes:

1x MD806 Pro Main Unit
1x User Manual
1x OBD II Cable 
1x USB Cable
1x Micro SD Card
1x Quick Guide 
1x Carry Case

Quel est le sens de QC marque sur produit?

1. Le QC marque signifie que ce produit a passé letest de notre ingenieur.
2. Le QC marque signifie que le produit est de notre société.
3. Le QC marque signifie que le produit obtiendra la garantie.

Attention les risques viennent de la douane:

1. Les colis DHL envoyés vers l'outre-mer de la france (Martinique, Réunion, Guadeloupe etc. ) ont peut-être des frais de douane, merci de votre compréhension.

2. Certains produits speciaux vers la France: Lexia 3 PP2000, Renault Can Clip, Multidiag Pro, Multidiag Actia, MB Star série etc. le mode de livraison n'est  que Yanwen EMS, délai de livraison est 8-13 jours. mais si vous voulez en DHL  , vous devez contracter moi  a temps , SVP

Contact informations:

Email: sales@CarOBD.fr 
            sales@OBDstar.fr
 
WeChat:Carobdfr
Skype:CarOBDii.fr
Telephone: +86 18102386990

whatsapp:+86 18102386990
 

Online service support
facebook : https://www.facebook.com/kris.carobd.5

Telephone: +86 18102386990

website mobile:

À propos de CarOBD.fr livraison :

livraisonPays européensAutres pays
poste aérienneenvrions 15-30 jours, pas de taxe
si il y a des accidents, il faut envrions 1-2 mois 
envrions 1-2 mois, pas de taxe
DHL/UPSenvirons 3-7 jours, par DHL, des temps, il faut payer la taxe,nous ne pouvons pas controler 
attendtion:
les frais de transport sur notre site ne contient pas la taxe, prace que nous ne pouvons pas controler votre douane
environs 3-7 jours, par DHL, des temps, il faut payer la taxe
Yanwenenvrions7-15 jours, ne faut pas payer la taxe pour Belgique, la Bulgarie, l'Angleterre, l'Estonie, la Finlande, le français, l'Allemagne, la Grèce, la Hollande, l'Irlande, l'Italie, le Luxembourg, l'Irlande, le Portugal, l'Ecosse, Slovaquie, Slovénie, Espagne, Royaume-Uni, Pays de Galles, le Danemark, la Suède, la Lituanie, la Lettonie Hongrie, la Roumanie , la République tchèque, la PolognePas de service
EMSenvrions 7-15 jours 7-20 jours