18% de réduction

Truck adblueobd2 Emulator for Scania Adblue Emulator Box Bonne Qualité

En stock. Histoire 7 vendu. Numéro d'articleSH36

Dernier prix: 28
Achat immédiat: 22.95 18% de réduction
Expedier De UK , Cliquer : http://www.carobd.fr/producttags/uk-expedie.html/

Pas Oubliez l’Action de Grâce, partir de 25 Novembre jusau'a 2 Decembre, 6% Reduction pour tous les produits.

whatsapp: +86 18102386990
Livraison:
Livraison gratuite Poste Ordinaire Service    Délai de livraison estimé: 10-20 jours de travail. Détails
Poids:
0.2KG
Paquet:
15.5cm*5cm*10cm     ( Inch: 6.09*1.96*3.93 )
Résultats:
Retour de remboursement dans 7 jours, l'acheteur paie les frais de retour. Lire les Détails ?

Description du produit

adblueobd2 Emulator Box designed to disable AdBlue system used in trucks, buses and other heavy vehicles with EURO 4/5 exhaust emission rates AdBlue Emulator Box bypasses electronic module of the Adblue system on vehicle.
SCANIA adblueobd2 Emulator, Trucks and Other Heavy Vehicles

SCANIA adblueobd2 Emulator Description:

adblueobd2 Emulator Box designed to disable adblueobd2 system used in trucks, buses and other heavy vehicles with EURO 4/5 exhaust emission rates adblueobd2 Emulator Box bypasses electronic module of the adblueobd2 system on vehicle.

Its very easy to fit adblueobd2 Emulator Box to any truck or bus equipped with adblueobd2 system and it will override adblueobd2 system instantly, it will stop the usage of adblueobd2 liquid. adblueobd2 Emulator Box disables adblueobd2 system electronics gently so there will be no power loss of the engine or any warnings on the dashboard and in diagnostic system.

This device works without interfering to work of other electronic systems of the vehicle. adblueobd2 Emulator Box has a wide range of supported vehicle models and there is only one version of emulator for all supported trucks, just upload the necessary program to the adblueobd2 Emulator Box and you can install it on any supported truck.

SCANIA adblueobd2 Emulator Installation:

The connections details diagram and wire colours refer to Scania R500 Year 2008, but the main procedure of the minusblue module does not vary. Before proceeding make sure no faulty codes are memorised in the original ECU, adblueobd2 liquid is higher than the reserve level and the truck batteries are disconnected from the system.

SCANIA adblueobd2 Emulator Wiring

5 conductors:

1) RED(+15). To be connected to a 24V source enabled when the engine key is in the ON position. This connection will supply power to the minusble Module when the engine key is on(dashboard on).
2) BLACK(0V). To be connected to an earth.
3) GREY(+30). To be connected to a 24V supply always available to the existing adblueobd2 system (F42 protection fuse and the adblueobd2 system).
4) WHITE(CAN H). To be connected to CAN H of the system.
5) BROWN(CAN L). To be connected to CAN L of the system.
The connections must be done inside the original adblueobd2 connector(the adblueobd2 ecu is located under the adblueobd2 tank)

SCANIA adblueobd2 Emulator Activation

The minusblue module and the original adblueobd2 module CANNOT both be activated at the same time, the GREY ACTIVATION WIRE(+30) is to enable the minusblue module working.

It is important to connect the GREY ACTIVATION WIRE(+30) to a 24V source always available(battery), moreover, the soldering operation must be done between the 20A fuse(F42) and the existing adblueobd2 module.

If you want to stop and exclude the original adblueobd2 module from working, all that needs to be done is to remove the F42 fuse before starting the engine.

The minusblue module will automatically be activated. To re-instate the original adblueobd2 module, all that needs to be done is to reinstall F42 fuse before starting the engine. The minusblue module will automatically be de-activated.

SCANIA adblueobd2 Emulator Self Learning

When the minusblue module is fully connected to the electrical circuit of the original adblueobd2 module, and after identification of the F42 fuse controlling the power feeding to the original adblueobd2 module the truck batteries can be Re-connected.

The minusblue module aquires the inputs from the CANBUS the first time the dashboard is turned on(key on but engine still off).

1) Make sure the F42 fuse is inserted.
2) Turn on the dashboard(key on) and verify that the red led is on.
3) After approx 1 minute the red led will turn off and the green led will turn on.
4) Switch off the dashboard(key off).

After this procedure the minusblue module will be activated whenever the dashboard is turned on(key on).

The Result Will Be:

1) If the F42 fuse is installed the original adblueobd2 system will be working. Both red and green leds will be on.
2) If the F42 fuse is not installed the original adblueobd2 system will not be working and the minusblue module will be activated. Both red and green led will be flashing.

Note: All this operations with the F42 must be done with the dashboard switched off (key off) 

LED FUNCTION ON - OFF


KEY OFF:- RED OFF, GREEN OFF - NO POWER FEEDING.
KEY ON:- RED OFF, GREEN OFF - TRUCK NOT SELECTED.
KEY ON:- RED ON, GREEN OFF - WAITING FOR SELF-LEARNING.
KEY ON:- RED OFF, GREEN ON - LEARNING COMPLETED.
KEY ON:- RED ON, GREEN ON - DATA SAVED, MODULE NOT ACTIVATED.
KEY ON:- RED PULSE, GREEN PULSE - DATA SAVED, MODULE ACTIVATED


When this box connected -adblueobd2 system of the truck would be fully emulated ,no errors related to adblueobd2.The box can be fast and easily installed to truck.
You can disconnect it ,reset and install into another truck .




 

Quel est le sens de QC marque sur produit?

1. Le QC marque signifie que ce produit a passé letest de notre ingenieur.
2. Le QC marque signifie que le produit est de notre société.
3. Le QC marque signifie que le produit obtiendra la garantie.

Attention les risques viennent de la douane:

1. Les colis DHL envoyés vers l'outre-mer de la france (Martinique, Réunion, Guadeloupe etc. ) ont peut-être des frais de douane, merci de votre compréhension.

2. Certains produits speciaux vers la France: Lexia 3 PP2000, Renault Can Clip, Multidiag Pro, Multidiag Actia, MB Star série etc. le mode de livraison n'est  que Yanwen EMS, délai de livraison est 8-13 jours. mais si vous voulez en DHL  , vous devez contracter moi  a temps , SVP

Contact informations:

Email: sales@CarOBD.fr 
WeChat:Carobdfr
Skype:CarOBDii.fr
Telephone: +86 18102386990

whatsapp:+86 18102386990
 

Online service support
 

Telephone: +86 18102386990

website mobile:

À propos de CarOBD.fr livraison :

livraisonPays européensAutres pays
poste aérienneenvrions 15-30 jours, pas de taxe
si il y a des accidents, il faut envrions 1-2 mois 
envrions 1-2 mois, pas de taxe
DHL/UPSenvirons 5-7 jours, par DHL, des temps, il faut payer la taxe,nous ne pouvons pas controler 
attendtion:
les frais de transport sur notre site ne contient pas la taxe, prace que nous ne pouvons pas controler votre douane
environs 5-7 jours, par DHL, des temps, il faut payer la taxe
Yanwenenvrions7-15 jours, ne faut pas payer la taxe pour Belgique, la Bulgarie, l'Angleterre, l'Estonie, la Finlande, le français, l'Allemagne, la Grèce, la Hollande, l'Irlande, l'Italie, le Luxembourg, l'Irlande, le Portugal, l'Ecosse, Slovaquie, Slovénie, Espagne, Royaume-Uni, Pays de Galles, le Danemark, la Suède, la Lituanie, la Lettonie Hongrie, la Roumanie , la République tchèque, la PolognePas de service
EMSenvrions 7-15 jours 7-20 jours
 
Les clients ayant consulté cet article ont également consulté